流感B病毒诊断试剂盒

芬兰流感B病毒诊断试剂盒

广州健仑生物科技有限公司

广州健仑长期供应各种流感检测试剂，包括进口和国产的品牌，主要包括日本富士瑞必欧、日本生研、美国BD、美国NovaBios、美国binaxNOW、日本积水、日本荣研、美国OSOM、芬兰、爱思普林、英国Clearview、凯必利、广州创仑等主流品牌。

芬兰流感B病毒诊断试剂盒

我司还提供其它进口或国产试剂盒：登革热、疟疾、流感、A链球菌、合胞病毒、腮病毒、乙脑、寨卡、黄热病、基孔肯雅热、克锥虫病、违禁品滥用、肺炎球菌、军团菌、化妆品检测、食品安全检测等试剂盒以及日本生研细菌分型诊断血清、德国SiFin诊断血清、丹麦SSI诊断血清等产品。

欢迎咨询

欢迎咨询2042552662

芬兰

想了解更多的产品及服务请扫描下方二维码：

【公司名称】 广州健仑生物科技有限公司
【市场部】    杨永汉

【】 
【腾讯  】 2042552662
【公司地址】 广州清华科技园创新基地番禺石楼镇创启路63号二期2幢101-103室

4、免疫组化中抗原修复的*条件是什么？（尤其是微波修复）
关于抗原修复，我试过的修复条件有EDTA热修复，柠檬酸钠为缓冲液的微波修复以及高压锅修复。从我的实验结果来看，微波修复其实很不容易掉片子的，而EDTA热修复和高压锅修复是很容易掉片子的。因为掉片子主要是因为加热过程中产生的气泡所引起，而微波修复水加热到沸腾，沾在片子上的气泡就会少，不会因为小气泡上串引起脱片。做EDTA修复时，你可以将片子靠的尽量近些，或是在载玻片四周垫些棉花什么的，然后盖上盖玻片，这样修复的话就能够尽量减少载玻片上小气泡的形成。我们用的微波修复条件为：2.94 g柠檬酸三钠溶于1000 ml的水，调PH值至6.0，微波修复10分钟。你可以试试，时间可以根据需要自己调整。对于柠檬酸修复来说，只要高压修复时间控制在加阀冒气后90秒，冷水下终止开高压锅盖，高压修复和微波修复一样不掉片子，而且一般高压修复效果往往更好一点；关于EDTA热修复，一般说明书上都讲的是PH值等于9，实际上我试过，如果单传用EDTA，很容易掉片子，但是用Tris-EDTA,一般就不会掉片子了，Tris-base的浓度为0.05 mmol/L,高压和微波修复都可以，PH也等于9。

4, immunohistochemistry in the best conditions for antigen repair what? (Especially microwave repair)
On the antigen repair, I tried the repair conditions are EDTA thermal repair, sodium citrate buffer for microwave repair and pressure cooker repair. From my experimental results, microwave repair is actually very easy to remove the film, and EDTA thermal repair and pressure cooker repair is very easy to swap the film. Because the film is mainly caused by the bubbles generated during the heating process, and microwave repair water heated to boiling, the bubble on the film will be less, not because of small bubbles on the strings caused by the delamination. When doing EDTA repair, you can keep the film as close as possible, or pad some cotton around the slide, and then cover it with a coverslip, which will minimize the formation of small bubbles on the slide. We used the microwave repair conditions: 2.94 g trisodium citrate dissolved in 1000 ml of water, adjust the PH value to 6.0, microwave repair 10 minutes. You can try, time can be adjusted as needed. For the citric acid repair, as long as the high-pressure repair time control in the valve after venting 90 seconds, open the pressure cooker under cold water cover, high pressure repair and microwave repair can not afford the same film, and generally high-pressure repair is often a little better; about EDTA Heat repair, the general instructions are talking about the PH value is equal to 9, in fact, I tried, if the single-pass with EDTA, it is easy to lose the film, but with Tris-EDTA, generally will not drop the film, Tris-base concentration 0.05 mmol / L, high pressure and microwave repair can, PH is also equal to 9.